Sentry Light Tactical Vest

Light MOLLE & Plate Pocket

The Sentry Light Tactical Vest is the perfect option for a full coverage vest with the addition of MOLLE for lightweight tactical items as well as the capability to carry hard armor plates. It delivers superior high-level threat protection for vital organs on the front, back and side to side. The front Velcro pocket can house a trauma plate or hard armor plate for added protection and the included soft armor is NIJ Level IIIA tested. Additional MOLLE on the back of the vest can be used to attach a hydration bladder. The shoulder straps are fortified with 3D spacer mesh for added comfort in addition to MOLLE to attach auxiliary items. Velcro strips are added to the front and back of the vest for identification patches.

Our Sentry Light Tactical Vest is made using our Protek™ graphene microfiber technology and comes in our Standard or Elite Options (see chart below for comparison). Unlike vests using only aramid fibers (Kevlar), our Elite level is impervious to water, UV rays and the environment and boasts an unprecedented 7-year warranty.

Vest sizes with correlating plate sizes

Vest Size

Trauma Plate Size

Hard Plate Size

Side Plate Size

XS (C1)

6″x 8″

8″x 10″

6″x 6″

S (C2)

6″x 8″

8″x 10″

6″x 6″

M (C3)

7″x 10″

10″x 12″

6″x 6″ or 6″x 8″

L (C4)

7″x 10″

10″x 12″

6″x 8″

XL (C5)

7″x 10″

10″x 12″

6″x 8″

CARRIER FEATURES

Sizes: C1 (XS), C2 (S), C3 (M), C4 (L), C5 (XL) View Recommended Sizing
Removable armor shields
Washable outer layer
Large adjustable straps
Velcro Identification Patch strip on front and back
Velcro pocket for trauma plate or additional hard armor
MOLLE on front and back for lightweight & auxiliary items
3D spacer mesh on shoulder straps for added comfort
1000D Nylon
PVC water resistance
Ventilated and lightweight mesh inner lining
DWR Antimicrobial coating
Made in the U.S.A.

Click here for Product Cleaning & Care Instructions
Click here for a Vest Comparison Chart

ARMOR SPECIFICATIONS

Tested for NIJ level IIIA standards (0101-06)
LEVEL IIIA Stops all TLII plus .44 Mag
Areal density 1.32 lbs/sq. ft. | Thinness 0.24 in.
Protek™ — graphene microfiber technology (Standard adds aramid fibers; Elite adds polyethylene)
Made in the U.S.A.

ARMOR LEVEL COMPARISON CHART
Standard Armor	Elite Armor
5 Year Armor Warranty	7 Year Armor Warranty
Features Protek™ Technology with Graphene Microfibers	Features Protek™ Technology with Graphene Microfibers
Includes Aramid Fibers	Includes Polyethylene (UHMWP)
Requires a water proof protective cover to not be exposed to water, UV light & environment	Impervious to water, UV light & environment
Protects against NIJ Level IIIA handgun rounds up to .44 mag	Protects against NIJ Level IIIA in addition to armor piercing rounds that include the FN 5.7x28mm, Winchester Ranger T-series SXT, and Liberty 9mm
Standard allowed Back Face Signature (BFS)	Up to 20% less Back Face Signature (BFS)
Not rated for stab resistance	Stab resistant up to 34 Joules

Click here for Product Cleaning & Care Instructions

PLEASE NOTE: WE ONLY SELL TO MILITARY, LAW ENFORCEMENT, AND GOVERNMENT AGENCIES. BY PURCHASING, YOU AGREE TO COMPLY WITH ALL FEDERAL, STATE, AND LOCAL LAWS REGARDING BODY ARMOR.

It is illegal for felons to purchase or wear body armor. In addition there are penalties for felons to possess or use body armor. Purchasing armor from ATEK Defense is done under the agreement that you will not use our products for any criminal use or allow anyone to do so.

*Refund policy: All Sales Are Final; unless manufacturer defect is present. Contact support for RMA approval due to a manufacturer defect.

Size	C1 (XS), C2 (S), C3 (M), C4 (L), C5 (XL)
Armor Level	Elite Armor, Standard Armor
Vest Weight	3 lb 5 oz (C1), 4 lb 2 oz (C2), 4 lb 12 oz (C3), 6 lb 14 oz (C4), 8 lb 12 oz (C5)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.